Replacement Tube Design - 25.40mm Reviews

Steel Specification 25.4mm x 1.2mm Wall Diameter – Z35 High Tensile Galvanised 35.0mm x 1.5mm Wall Diameter – Z35 High Tensile Galvanised 50.8mm x 1.5mm Wall Diameter – Z35 High Tensile Galvanised 60.3mm x 1.5mm Wall Diameter – Z35 High Tensile Galvanised The length of swage for each tube are as follows: 25.4mm-51mm 35.0mm-70mm 50.8mm-83mm 60.3mm-90mm The OD of a swaged tube are as follows: 25.4mm-22.0mm 35.0mm-31.0mm 50.8mm-46.8mm 60.3mm-56.3mm A ‘Swaged’ joint creates an OD that will fit our supplied tube ‘Plain’ and adds a nominal increase in the length of 2.5mm – Example a tube 100cm long (1000mm) with ‘Swage Ends’ at each end will result in a final length of 100½cm (1005mm). We can send a small sample of a swaged tube if you wish to check the OD of the swaged tube with material not sourced from ourselves. A ‘Flattened’ joint creates a nominal loss in the length of 5mm – Example a tube 100cm long (1000mm) with ‘Flattened Ends’ at each end will result in a final length of 99cm (990mm). Flattened End for 60.3mm is not available.