Bodor Laser Reviews 1,253

Everything is ok

We are using 3 Bodor laser cutting…
We are using 3 Bodor laser cutting machines .We had a problem about laser head.We explained our problem to Bodor.Mr Thi, Mr Bảo and Đặng came to ourfactory in a short time.They solved our problem and machine is working correctly .Thanks to friends and Bodor company !!

The overall experience was fantastic! Setting up the machine was an good experience, everything went smooth. The end result is great, everything works fine. Learned a lot of new things. Mr. Zhang was very precise and accurate with his work.

Hi,
We have 6kw Bodor laser cutting machine.We observed some temperature problem on head .Then we talked Bodor.Same day Mr Taha came to factory and started to repair.To sum up after his repair, machine is working .Thanks to Mr Taha and Bodor company.Especially we are very happy about fast response

Hello Bodor;
We bought K230 Bodor tube cutting machine .Firstly Mr Taha came to our factory for preparation.After then he and Mr Batuhan started to instalaltion.After then training part finished very well.Our machine is working now .Thank to Mr Taha ,Mr Batuhan and Bodor for this support .

Hello friends, we have 6kw Bodor laser cutting machine. Machine had a problem about bottom kit because of our fault.We talked Mr Taha.He prepared new spare part for us in a short time (1day).Then he replaced and our machine is working perfectly now.Also he set 8mm and 20 mm parameter again.Thanks to Mr Taha and Bodor company!!

Recently I bought a new machine, and their company sent an engineer from China to install it for me. The engineers installed it very quickly.The cutting effect of the machine is extremely good, and the processing is also great. The service engineer is very serious and responsible and has great experience. This company is very professional.

The cutting effect of the machine is very good, and the processing effect is also great. The service engineer is very serious and responsible, and has a good experience

I am Mr Tam at DMF steel processing company. Our company use bodor A6 6kw laser cutting machine. My laser machine has a noise in the Z axis. After reporting to bodor company, my laser machine was quickly repaired by engineer Mr Duc, thank you bodor customer service

Hello,We are using 3kw Bodor laser cutting machine around 8 month.machine had a problem about gas valve.We talked Mr Taha and Mr Batuhan.They came to our factory and repaired.Machine is working good now.Thanks to Mr Taha,Mr Batuhan and Bodor company!

Chiller also had a problem. The engine had malfunctioned. Bodor service came and solved our problem. He also answered our questions about the software. Our machine is 3kw Pipe. We are very satisfied with the operation of our machine now. We would like to thank Mr. Batuhan for his service.

Most of the 5 star reviews here regarding bodor machines are FAKE!, they were written by one or more people that use the same story and structure with not a single confirmed client :D

be very weary of this chinese brand. we were offered a bodor fiber laser cutting machine, first full price on a 4kw, then for the same price a 8kw, and then for the same price a 12kw... everything was said to us so that we buy one but when we went to 3 different clients to see a demo of the machine on all 3 occasions their machines were broken with different excuses and we could not see a demo of machines not 1 year old!

If you consider buying it make sure that your contract clearly states that upon dissatisfaction you will get your money back other wise you might end up buying a cat in a sack.

We requested service for 12kw p machine’s general laser head maintenance. Bodor’s service engineer Mr. Batuhan has come and conducted maintenance for the machine as well as the laser head. We had few questions regarding the machine which he answered all. After the maintenance, he also made sure that our machine works perfectly by test cutting which we appreciated a lot. Thanks to his smooth services we are very satisfied. We thank Bodor and Mr. Batuhan for their support and service.

We have a 3kw bodor machine. We have been using the machine for two years. We requested service for general laser head maintenance. Batuhan came and did the general maintenance. He answered our questions. Our machine is running smoothly. We are very satisfied. We thank Bodor and Mr. Batuhan for their support and service.

our company use machine A3 SN:6500012662 bodor laser cutting machine. The laser machine has good quality after-sale service is also good. Engineer Mr Duc has good skills to help us repair quickly. We are very pleased with the bodor technical service.

We recently acquired the A-series machine and its technician Jasper knows how to teach in a practical and professional way, solves all doubts quickly and is efficient.

We bought our second BODOR machine. Bodor service engineer has arrived and completed the installation of our second C3 6kw scan machine today along with providing training and setting parameters. New machine is working with no problem hence we would like to thank to Mr. Batuhan sincerely for his thorough services.

We are old Bodor user, we had a laser 4 years ago and it still works fine today. We are very happy now that we have another bodor device, thanks to bodor engineer Hanson who helped us install and taught us how to use the device. Hope to have more cooperation with Bodor in the future.

We have just purchased a Laser Bodor i5. What a great machine. Really everything we needed. In addition, Fred, the person who came to install it is very conscientious, very professional, did a great job in addition to the really clear training. Thanks to him.

After buying a 6kW sheet metal laser from the Bodor, we’re very satisfied with our new machine. We’re also content with the service as well as customer support. Thanks to the Bodor service enginerees